Click the picture to view the original image
中国激光打孔机制造商/激光打孔机价格
1规格
HANS * GS-D400P香烟接装纸激光打孔机主要由五部分组成：激光发生器，光学分裂系统，co控制系统，进料系统，水冷装置（选配）零配件：零米机构）。
1.Regarding OEM40iX laser generator, the operation is very simple, using the menu selection type, you can set and select power output, frequency, beam pattern directly in the control box of laser generator.
HANS * GS-D400P射孔机的一般性能和参数
| 激光功率 | 400W |
| PLC公司控制类型 | 闭环 |
| 调节器 | 德国SIEMENS伺服系统 |
| 进料控制 | 双轴l墨水控制 |
| 指标设定方法 | 独立，简单 |
| 分光光度法 | 通过多边形棱镜 |
| 渗透率范围 | 100-2000cu |
| 渗透性不稳定 | 小于5％（相对误差） |
| 最大射孔速度 | 1920万/分钟 |
| 最大射孔密度 | 4只/毫米 |
| 最小射孔密度 | 1个/10毫米 |
| 孔直径范围 | 0.05-0.25mm |
| 孔的形状 | 椭圆形或圆形 |
| 孔质量 | 整洁，没有边缘或焦化 |
| 最大进料速度 | 650米/分钟 |
| 穿孔行号 | 2-8排 |
| 加速时间（0-300m / min） | 3秒。 |
| 总系统功率 | 35KW |
| 处理接装纸盘的宽度范围 | 40-80mm |
| 最大加工绕线盘直径 | 520毫米 |
| After perforate tipping paper tray, the front-end non-porous paper length and tail length of waste paper(feeding speed is 300m/min) | 15M(front),2M(tail) |
| Environment requirments | 20-30ºC Constant temperature |
| Machine lifetime | 10 years |
| Chilling water hardness | 250mg/L |
| Gas consumption of laser head | 2.8L/min |
| Temperature of cooling machine, adjusting range | 10-30ºC |
| about the cooling machine temperature and adjusting precision, is there monitor display ? | Yes, the adjusting precision is ±0.1ºC. |
| Chilling water flow speed | 25L/MIN |
| Water storage capacity of chiller | 0.3M3 |
Principal Performance Parameters of OEM40iX laser generator
| Item | Power | Stability | Peak power | Diameter of beam | Beam quality factor |
Divergence angle |
Frequency | Power feedback |
| OEM40iX | 20- 400W | <±2% | 1000W | 12.4±1mm | K>0.8 | 2mrad | 0-130Hz | With |
1.Regarding OEM40iX laser generator, the operation is very simple, using the menu selection type, you can set and select power output, frequency, beam pattern directly in the control box of laser generator.
2.Owning to the connection between the laser generator and PLC of control cabinet, PLC can be responsible to start the generator, stop the generator, have interlocking control, and debug according to the received operation signals. When the generator or exterior circuit meets with the faults, you can stop the generator in time and on the touch screen, it will show the faults reason and positions.
3.only when the generator can satisfy the certain condition of interlocking, you can start it, in this way, even if it occurs to the mistake operation, it won't destroy the laser generator or other parts of equipment.
Form feeding system
HANS*GS-D400P laser perforating machine selects Germany SIEMENS servo system to control the form
feeding system, due to SIEMENS servo system with strong calculation ability, rapid speed, high control precision, it has interior roll diameter automatic calculation function, and can ensure that the speed of form feeding is constant and the surface is kept neat.
Water -chilling unit
The water -chilling unit is researched and developed by ourselves, and it's a professio最终的冷水系统，并配备3个冰箱，300L容量的不锈钢水箱。它可以合作实时控制水温和流量并设有警示设备，其水为净化水，带过滤器。水温始终保持在20±0.5ºC。
2具体图片
5包装
6工厂概述
