Chinaebr.com - China Manufacturers, Suppliers & Products
Click the picture to view the original image

5J/50J plastic simply supported beam impact testing machine

Brand: jinanfangyuan
Area: China
Validity: forever
 
Information of the company
 
 
Details

5J/50J Simply supported beam impact testing machine/plastic impact tester 


Contact us


Jinan Fangyuan Testing Machine CO.,Ltd

TEL:13864006141      

Email:jnfysyj01@163.com

Wechat:13864006141

Address:No.276,Nanxinzhuang West Road,Shizhong Dist.,Jinan, Shandong, China. 

Website:www.shijinyiqi.com


Product Overview

The XJJ-5 and XJJ-50 simply supported beam impact testing machines are both used to measure the impact 

toughness of non-metallic materials such as hard plastics, fiber reinforced composite materials, nylon, fiberglass, 

ceramics, cast stones, and plastic electrical insulation materials. It is a commonly used equipment for quality 

inspection in scientific research institutions, universities, and related factories and mines. Meet the GB/T 1451-2005 

Test Method for Impact Toughness of Fiber Reinforced Plastic Simply Supported Beams.

Technical specifications

Technical specifications of XJJ-5 simply supported beam impact testing machine

1. Pendulum energy: 1J 2J 4J 5J

2. Pendulum force distance: 1J Pendulum Pl=0.516Nm 2J Pendulum Pl=1.031Nm 4J Pendulum Pl=2.062Nm 5J 

Pendulum Pl=2.578Nm

3. Minimum graduation value of the dial: 1/100

4. Impact speed: 2.9 m/s

5. Pendulum pre lift angle: 160 °

6. Distance from the center of the pendulum axis to the center of the sample: 221mm

7. Jaw fillet radius: 1mm

8. Impact blade angle: 30 °

9. Impact blade fillet radius ±: 2mm

10. The weight of the machine base is 40 times greater than the heaviest pendulum used and can be adjusted 

horizontally

Technical specifications of XJJ-50 simply supported beam impact testing machine

1. Pendulum energy: 7.5J 15J 25J 50J

2. Pendulum force distance: 7.5J Pendulum Pl=3.866Nm 15J Pendulum Pl=7.733 Nm 25J Pendulum Pl=12.889 Nm 

50J Pendulum Pl=25.777 Nm

3. Minimum graduation value of the dial: 1/100

4. Impact speed: 3.8 m/s

5. Pendulum pre lift angle: 160 °

6. Distance from the center of the pendulum axis to the center of the sample: 380mm

7. Jaw fillet radius: 1mm

8. Impact blade angle: 30 °

9. Impact blade fillet radius ±: 2mm

10. The weight of the machine base is 40 times greater than the heaviest pendulum used and can be adjusted 

horizontally



 
在线客服