1.Product brief introduction
If the wood log is rotary peeled directly without wood debarking, the bark fiber block blade seam easily. And there is the metal and soil sand in the bark, these things easily damage the knife blade during veneer rotary cutting work, so the wood bark must be removed before rotary veneer peeling. This machine is main equipment to remove wood bark and before veneer peeling work.
2.Product parameter list
|Log dimension processing||500 *1400 mm||500 *1400 mm|
|Rotary knife specification||1500 * 180 *16 mm||1500 * 180 *16 mm|
|Diameter of roller||180 mm||200 mm|
|Reference output||120 m³/ day||120 m³/ day|
|Hydraulic system power||7.5kw||7.5kw|
|Power of single roller||1*11kw||2*7.5kw|
|Single roller reducer||350||350|
|Power of double roller||1*11kw||2*11kw|
|Double roller reducer||350||350|
|Product dimension||4000 * 2200 * 1800 mm||4000 * 2200 * 1800 mm|
1) After the bark peeling could protect peeling knife in veneer peeling step, improve veneer grade
2) Adopts rotary cuttingprinciple of non-chuck rotary lathe
3) Hydraulic pressure drive into the constructions, can quickly and effectively
remove bark and complete log the round work
4) One debarker machine can supply with two rotary lathe, save about five or six people
5) Hydraulic feeding, can debarking and roundup small size raw log
6) Competitive price and quality
1) online technical and engineers support.
2) With principle of peeling, removing the log's skin and straighting logs.
hydraulic driven feed mechanism,can quickly, efficiently put log removal of bark,
round.,one set debarker can supply 2 set peeling machine .
3) It saves the original manual peeling, rounding procedure, save 5-6 human .