China Laser Perforating Machine Manufacturer_Supply_Wuhan Hans Goldensky Laser System Co., Ltd.

Home Companies Product TradeLeads

Wuhan Hans Goldensky Laser System Co., Ltd.

Wuhan Hans Goldensky Laser System Co., Ltd.

Product Category
Home » Supply » China Laser Perforating Machine Manufacturer
China Laser Perforating Machine Manufacturer
Click the picture to view the original image
Product: China Laser Perforating Machine Manufacturer 
Brand: HANS GS
Laser power: 400W
PLC control type: closed-loop
Controller: Germany SIEMENS servo system
Valid Date: 2020-08-27 [expired]
Last update: 2018-09-21 09:17
Detailed information

中国激光打孔机制造商/激光打孔机价格

1规格
HANS * GS-D400P香烟接装纸激光打孔机主要由五部分组成:激光发生器,光学分裂系统,co控制系统,进料系统,水冷装置(选配)零配件:零米机构)。

HANS * GS-D400P射孔机的一般性能和参数

激光功率 400W
PLC公司控制类型 闭环
调节器 德国SIEMENS伺服系统
进料控制 双轴l墨水控制
指标设定方法 独立,简单
分光光度法 通过多边形棱镜
渗透率范围 100-2000cu
渗透性不稳定 小于5%(相对误差)
最大射孔速度 1920万/分钟
最大射孔密度 4只/毫米
最小射孔密度 1个/10毫米
孔直径范围 0.05-0.25mm
孔的形状 椭圆形或圆形
孔质量 整洁,没有边缘或焦化
最大进料速度 650米/分钟
穿孔行号 2-8排
加速时间(0-300m / min) 3秒。
总系统功率 35KW
处理接装纸盘的宽度范围 40-80mm
最大加工绕线盘直径 520毫米
After perforate tipping paper tray, the front-end non-porous paper length and tail length of waste paper(feeding speed is 300m/min) 15M(front),2M(tail)
Environment requirments 20-30ºC Constant temperature
Machine lifetime 10 years
Chilling water hardness 250mg/L
Gas consumption of laser head 2.8L/min
Temperature of cooling machine, adjusting range 10-30ºC
about the cooling machine temperature and adjusting precision, is there monitor display ? Yes, the adjusting precision is ±0.1ºC.
Chilling water flow speed 25L/MIN
Water storage capacity of chiller 0.3M3

Principal Performance Parameters of OEM40iX laser generator

Item Power Stability Peak power Diameter of beam Beam quality factor Divergence
angle
Frequency Power feedback
OEM40iX 20- 400W <±2% 1000W 12.4±1mm K>0.8 2mrad 0-130Hz With

1.Regarding OEM40iX laser generator, the operation is very simple, using the menu selection type, you can set and select power output, frequency, beam pattern directly in the control box of laser generator.
2.Owning to the connection between the laser generator and PLC of control cabinet, PLC can be responsible to start the generator, stop the generator, have interlocking control, and debug according to the received operation signals. When the generator or exterior circuit meets with the faults, you can stop the generator in time and on the touch screen, it will show the faults reason and positions.
3.only when the generator can satisfy the certain condition of interlocking, you can start it, in this way, even if it occurs to the mistake operation, it won't destroy the laser generator or other parts of equipment.
40-80mm激光打孔机,用于处理接装纸盘的宽度范围
Form feeding system
HANS*GS-D400P laser perforating machine selects Germany SIEMENS servo system to control the form
feeding system, due to SIEMENS servo system with strong calculation ability, rapid speed, high control precision, it has interior roll diameter automatic calculation function, and can ensure that the speed of form feeding is constant and the surface is kept neat.
40-80mm激光打孔机,用于处理接装纸盘的宽度范围
Water -chilling unit
The water -chilling unit is researched and developed by ourselves, and it's a professio最终的冷水系统,并配备3个冰箱,300L容量的不锈钢水箱。它可以合作实时控制水温和流量并设有警示设备,其水为净化水,带过滤器。水温始终保持在20±0.5ºC。

2具体图片

40-80mm激光打孔机,用于处理接装纸盘的宽度范围
40-80mm激光打孔机,用于处理接装纸盘的宽度范围

5包装

40-80mm激光打孔机,用于处理接装纸盘的宽度范围

6工厂概述

40-80mm激光打孔机,用于处理接装纸盘的宽度范围

Inquiry sheet