Click the picture to view the original image
Shoulders Brush Cutter BG328
| Model | BG328 |
| Mating Engine | 1E36F |
| Max Power | 0.81kw/6000r/min |
| Discharging Capacity | 30.5cc |
| Blade Length | 260mm |
| Fuel Tank Capacity | 0.8L |
| Type of Carburetor | Float |
| N.W/G.W | 10.5/12kgs |
| Packing measurement | 330305x455(engine) 1380104x70(shaft) |
Precautions for use of brush cutter:
The brush cutter is a two-stroke power. During use, attention should be paid to power, use and cutting tools to ensure the normal use of the machine:
1. Engine:
A. Gasoline and engine oil, and ensure their mixing ratio (25:1);
B. Regularly (25 hours) check and replace the air filter and check the spark plug;
C. After working a tank of oil, rest for 10 minutes, and clean the loose gasket of the machine after each work to ensure heat dissipation;
D. During storage, the machine body must be cleaned, the mixed fuel must be discharged, and the fuel in the carburetor must be burned; Remove the spark plug, add 1-2ml of two-stroke engine oil into the cylinder, pull the starter 2-3 times, and install the spark plug.
2. Transmission: regularly (25 hours) add grease to the reduction gearbox, and add grease to the joint between the upper part of the transmission shaft and the clutch disc.
3. Cutting tool: the length of nylon cable head shall be controlled to be < = 15cm. When using the blade, ensure the balance of the blade, and never use the blade with vibration.
If you are interested in our product,please inform me you plan qty,I will send you the detail quotation.
