Click the picture to view the original image
Information:
| Item | Description |
| Model | 3040R5-22 |
| Outside dimension | 735x1060900mm(LxWxH) |
| Working platform size | 480280(LxW) |
| frame Material | Aluminium alloy |
| Max. Feeding height | 245mm(From base of Z axis to platform) |
| X, Y, Z Working Area | 400300x195mm |
| Sliding unit: | |
| X axi | ø20 High intensity round rail guide |
| Y axis | ø20 High intensity round rail guide |
| Z axis | ø12 High intensity round rail guide |
| Drive unit: | |
| X axis | SFU1605 Ball Screws; |
| Y axis | SFU1605 Ball Screws; |
| Z axis | SFU1204 Ball Screws; |
| Stepping motor | two-phase 3A(57model, same as Nema 23) |
| Driving Power for Stepping motor | AC110-220V, 240W; Output DC 24V, 10A |
| Maximum Idle speed | 1500mm/min |
| Working Speed | 50-1500mm/min(different material with different speed settings) |
| Spindle motor | 2200W high-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur |
| Variable-frequency Drive (VFD) | AC220V, 2200W, 0-400Hz (built-in Control box ) |
| Drive of stepping motor | 0-3.5A adjustable four-axis drive (TB6560AHQ chip, 24V power supply, 2, 4, 8, 16 Subdivision, Factory setting: 8 subdivided |
| Repositioning precision | ≤0.05mm |
| Speed | 0-24000rpm |
| Cooling method | Water cooling, come with water pump |
| Spindle precision | Radial runout≤ 0.03mm |
| Carving command | G code/TAB file/nc/TAB /NCC/file |
| Protection | Emergency stop button |
| Communication interface | Parallel/USB port to computer |
| Input Volts | AC 220V |
| Available Software | Mach3 |
| Software Environment | XP 32 bite or Windows 7 32 bite |
| Gross weight | 85kg |
Produciton show:
