Click the picture to view the original image
Information:
| Item | Description |
| Model | 6090S3-22 |
| Outside dimension | 1445x1130888mm(LxWxH) |
| Working platform size | 7201180mm(LxW) |
| frame Material | 6061 Aluminium alloy + metal plate |
| Max. Feeding height | 160mm(From base of Z axis to platform) |
| X, Y, Z Working Area | 600900x105mm |
| Sliding unit: | |
| X axi | ø20 High intensity Square rail guide |
| Y axis | ø20 High intensity Square rail guide |
| Z axis | ø20 High intensity Square rail guide |
| Drive unit: | |
| X axis | SFU1605 Ball Screws; |
| Y axis | SFU2510 Ball Screws; |
| Z axis | SFU1605 Ball Screws; |
| Stepping motor | two-phase 3A(86 Model,same as nema 34) |
| Driving Power for Stepping motor | AC110-220V, 240W; Output DC 24V, 10A |
| Maximum Idle speed | 1500mm/min |
| Working Speed | 50-1500mm/min(different material with different speed settings) |
| Spindle motor | 2200W high-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur |
| Variable-frequency Drive (VFD) | AC220V, 2200W, 0-400Hz (built-in Control box ) |
| Drive of stepping motor | 0-3.5A adjustable four-axis drive (TB6560AHQ chip, 24V power supply, 2, 4, 8, 16 Subdivision, Factory setting: 8 subdivided |
| Repositioning precision | ≤0.05mm |
| Speed | 0-24000rpm |
| Cooling method | Water cooling, come with water pump |
| Spindle precision | Radial runout≤ 0.03mm |
| Carving command | G code/TAB file/nc/TAB /NCC/file |
| Protection | Emergency stop button |
| Communication interface | Parallel port to computer |
| Input Volts | AC 220V |
| Available Software | March3/ EMC2 |
| Software Environment | XP 32 bite or Windows 7 32 bite |
| protection of Axis | limit switch(Proximity Sensor) |
| oil-way | auto-grease pump |
| Gross weight | 85kg |
