HANS*GS-D400P cigarette tipping paper laser perforating machine is mainly composed of five parts : laser generator, optical splitting system, control system, form feeding system, water -chilling unit ( optional accessory: zero meter mechanism).
Products:
Specification:
General performance and parameters of HANS*GS-D400P perforating machine
Laser power |
400W |
PLC control type |
closed-loop |
Controller |
Germany SIEMENS servo system |
Form feeding control |
Biaxial linkage control |
Indicator setting method |
Independent, simple |
Spectrophotometric method |
by polygon prism |
Permeability range |
100-2000cu |
Permeability instability |
Less than 5% (relative error) |
Maximum perforating speed |
1920 thousand /min |
Maximum perforating density |
4pcs/mm |
Minimum perforating density |
1pc/10mm |
Hole diameter range |
0.05-0.25 mm |
Hole shape |
oval or round |
Hole quality |
neat, without deckle edge or coking |
Maximum feeding speed |
650m/ min |
Perforating row number |
2-8 rows |
Acceleration time (0-300m/min) |
3sec. |
Total system power |
35KW |
Width range of processing tipping paper tray |
40-80mm |
Maximum processing winding tray diameter |
520mm |
After perforate tipping paper tray, the front-end non-porous paper length and tail length of waste paper(feeding speed is 300m/min) |
15M(front),2M(tail) |
Environment requirments |
20-30ºC Constant temperature |
Machine lifetime |
10 years |
Chilling water hardness |
250mg/L |
Gas consumption of laser head |
2.8L/min |
Temperature of cooling machine, adjusting range |
10-30ºC |
about the cooling machine temperature and adjusting precision, is there monitor display ? |
Yes, the adjusting precision is ±0.1ºC. |
Chilling water flow speed |
25L/MIN |
Water storage capacity of chiller |
0.3M |
Zero meter mechanism (optional accessory)
1. When the winding motor starts working, the paper feeding speed doesn't reach the setting speed, which phase is the accelerating phase of paper, in this phase, the laser generator doesn't start working, no need to punch for paper. If without 2. Zero meter mechanism, the non-porous parts only can be eliminated manually after rewinding, and the customer needs to increase the equipment and operator.
3. The working time of Zero meter mechanism can be set freely by the touch screen. The length of eliminating non perforating parts paper is relative to the working time, generally, the length of eliminating non-porous parts paper is no more than 15 meters.
Customer visit
Application:
This set of equipment can realize ventilation and tar reducing through perforating tipping paper of cigarette filter tip in production line and to reduce the harm of smoking to human body.